Showing 409–420 of 434 results

Show sidebar

Stat Trac Cot Fastening System

The Stat Trac Cot Fastening System protects your crews and patients in the event of an accident. The Stat Trac has been fully tested to meet ambulance safety requirements from the Society of Automotive Engineers (SAE) and is compatible with the POWERFlexx+ST Ambulance Cot and the 35XST PROFlexx Ambulance Cot.

O-Two Statvac II Oxygen Powered Aspirator

The O-Two Statvac® II Aspirator is capable of effectively suctioning out excessive quantities of fluid/particles from a patient’s oro/naso pharynx. The lightweight aspirator is designed to be attached to any 50 psi DISS outlet. The suction catheter can be quickly cleared of foreign material by covering the aspirator exhaust port with one finger, reversing the flow. Includes 12oz Jar, 6ft Hose, and Tubing.

PMI Bokat Rope Washer

The plastic body clamps over the rope and cleans it with a combination of water pressure and brushing action. The inside is lined with AstroTurf®, which scrubs the rope as it is pulled though the washer. The PVC housing is made with a flexible vinyl hinge co-extruded for longevity. Hook-and-loop fasteners adjust for different rope and hose diameters up to 3/4 in (19 mm).   Working-At-Height / Industrial Rope Access / Technical Rope Rescue Working at height requires reliable, quality equipment. The PMI Bokat Rope Washer can be used to wash the rope used with equipment and hardware in work-at-height maneuvers, industrial rope access or technical rope rescue. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.

Rope I.D. Markers

Write, type, or stamp information on the 3/4 x 1-in (19 x 25 mm) white area. The clear self-laminating portion wraps around to protect writing. Works on rope up to 5/8-in (16 mm) diameter. For permanence, we recommend that you apply two or three coats of clear Whip-End Dip over the marker. 60 markers per book.   Working-At-Height / Industrial Rope Access / Technical Rope Rescue Working at height requires reliable, quality equipment. Rope I.D. Markers can be used to mark the rope to be used with equipment and hardware in work-at-height maneuvers, industrial rope access or technical rope rescue. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.

Whip-End Dip Rope Sealer

Designed to seal the end of a rope to prevent fraying or unraveling, Whip-End Dip’s water-based formula is environmentally friendly and easy to clean up. On rescue rope, the clear formula is used to seal the Rope I.D. Marker or other rope-end identification. The sealer comes with a brush for application.   Working-At-Height / Industrial Rope Access / Technical Rope Rescue Working at height requires reliable, quality equipment. The Whip-End Dip Rope Sealer can be used to seal rope that is used with hardware in work-at-height maneuvers, industrial rope access or technical rope rescue. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.

Shrink Tubing

Clear tubing protects labels on the end of ropes. Slide over the label and use a safe heat source to shrink the tubing securely to the rope. Sold by the foot.

Edge Guards

Protect your rope with tough #4 duck canvas and a layer of vinyl coated polyester. Our Edge Guards close with a two-inch strip of hook-and-loop. A strong web loop lets you anchor the Edge Guard to keep it in place. (We do not use grommets as a moving rope can abrade a grommet enough to create a sharp edge.) Use an Edge Guard to protect anchor ropes and webbing as well as your rescue ropes.   Working-At-Height / Industrial Rope Access / Technical Rope Rescue Working at height requires reliable, quality equipment. Edge Guards can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards under which they fall. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.

Edge Pad

Our heavy-duty edge pad, made from rugged 24-oz #4 canvas protects ropes from abrasion and helps keep them clean, increasing their life. It also reduces the amount a rope digs into a soft edge, such as the berm of a road. Our improved design replaces metal grommets and uses strong integrated corner web loops that allow for anchoring in place when needed. The pads also feature a set of additional offset web loops, allowing overlap when joining two or more pads to extend coverage. Pads work well over most edges and also protects when wrapped around trees, rails and beams.
  Working-At-Height / Industrial Rope Access / Technical Rope Rescue Working at height requires reliable, quality equipment. Edge Pads can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards under which they fall. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.

Ultra-Pro Edge Protectors

A CMC Rescue Exclusive The most sought-after edge protection available features super slick, high-performance material that not only protects your rope from sharp or rough edges, but also greatly reduces friction. The Ultra-Pro is lighter and easier to transport than edge rollers or similar devices and its lower profile avoids tipping often encountered with taller devices. It conforms to the edge, and prevents sharp bends in the rope. Protectors are available in two sizes: the Ultra-Pro 2 is for two ropes, and the Ultra-Pro 4 accepts four ropes. Carabiner holes in all four corners allow the Ultra-Pro to be tied off for safety or linked together for extended protection.
  Working-At-Height / Industrial Rope Access / Technical Rope Rescue Working at height requires reliable, quality equipment. The Ultra-Pro Edge Protectors can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards under which they fall. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.

Rope Bags

Solid performers for years, our popular Rope Bags have been enhanced with innovative features for even greater convenience and ease of use. New contoured backpack-style shoulder straps were redesigned to offer greater comfort when carrying heavy loads. Bag tops incorporate a rugged rip-stop nylon for easy closure. Grab handles secured inside the top can be used to hold the bag open for quicker stuffing or to carry the bag from the top, haul-bag style. A sturdy side carry handle has been relocated for improved balance and includes gear loop attachments. The bottom of the bag features our new reach-in pouch that enables easy access so that even a knotted rope end can be deployed from either side, while remaining secure when transporting. Sewn web loops are attached at the base to enable tying the rope end off internally or externally.    

Rope and Equipment Bags

IMPROVED! With all the same refinements as as our newly improved rope bags, the Rope & Equipment bags have been enhanced with all new features including accessory pouches now feature zippered closures for securing even the smallest of items, and a removable internal daisy chain loop for attaching connectors and gear.

Stifneck Select Collars

As a single piece, that requires no assembly, the Stifneck Select collar is an easy choice for patients requiring spinal immobilization. Strong quality and molded directions on the back of the collar mean that providers will always be able to administer proper sizing and application. The locking mechanism ensures symmetrical adjustments, and gives providers the peace of mind the collar is locked safely into place.