Showing 1–36 of 78 results

Show sidebar

Transcend Stair Chair

The Transcend Stair Chair with POWERTraxx provides maximum safety and power when transporting a patient up or down stairs. Its electronically-controlled motor, direct drive transmission, and powered tracks push and pull patient loads of up to 550 pounds up and down stairs with ease. The chair and track system carry the weight, increasing patient safety and reducing operator fatigue and risk of injury.

iNX Patient Transport & Loading System

Every-day operations in EMS, such as lifting and lowering, and loading and unloading, increase the risk of personal injury to medics. This often results in lost workdays and even lost careers. The iN∫X system was created with extensive feedback from EMS professionals to protect you from the risk of injury at every step of the call, and make your job easier while enhancing delivery of care. The iN∫X system was created with extensive feedback from EMS professionals to protect you from the risk of injury at every step of the call, and make your job easier while enhancing delivery of care. Ferno iN∫X Specification PDF

POWER X1 Ambulance Cot

The POWER X1 Ambulance Cot offers more power, stability, maneuverability, and speed than any competitive powered cot.

With an unassisted lift capacity of 700 lb, the POWER X1 is the ultimate solution for both everyday and bariatric transport. Its industry-leading battery technology provides high-powered, reliable performance on every call. The POWER X1 is cross-compatible, as it can be used with a range of cot fastening systems—including both FERNO and Stryker solutions.

EZ-Glide Stair Chair with POWERTraxx

The EZ-Glide with Powertraxx® provides maximum safety when going up and down stairs using an electronically controlled motor and direct drive transmission with chair tracks. The tracks and motor carry the patient load, not the operator. Enjoy maximum performance on every call with intelligent power system that runs up to 20 flights of stairs per charge. The chair's easy operation when climbing or descending stairs with intuitive, easy-to-use paddle-style controls keep you in control. Visit www.ferno.com/powertraxx to register for more information or a demo. Available in red and blue.

EZ-Glide 59T Stair Chair

The EZ Glide® Tracked Stair Chair glides patient loads up to 500 lbs. down stairs without carrying or lifting. Ferno’s industry leading one inch track-to-ground clearance and front swivel-wheels provide superior maneuverability over carpet and in confined spaces such as stair landings. Available in red and blue.

35-A Mobile Transporter

The Model 35A Mobile Transporter, combines the benefits of a multi level cot with the easy loading of a roll-in style cot. Empty one-person load capability for user convenience. Back rest is adjustable to 8 different height levels. The Ferno 35A Cot provides exceptional value for X-frame cot users. The cots weighs just 74 lbs. and has a proven record of dependability with over 20 years of use by services all over the country.

POWERTraxx Conversion Kit for EZ-Glide Stair Chair

Upgrading from a standard evacuation chair to a powered model doesn’t have to mean abandoning existing equipment and starting from scratch. Ferno’s PowerTraxx conversion kit contains everything that’s needed to economically retrofit power control onto a EZ GLIDE chair – transforming it into the most flexible powered track chair available anywhere. Installed by a trained technician, the kit includes all the parts needed to convert a standard chair into a powered chair; a motorised track module, control panel, battery and charger, and all necessary mounting and connection hardware.

35-IT Incubator Transporter

The Model 35-IT is designed to safely carry transport incubators in emergency vehicles. An OHMEDA Transport Incubator fits snugly onto the Model 35-IT. An Air-Shields or AirBorne incubator may be used with an optional adapter kit. The Model 175 Series Fastening System is recommended for use with the Model 35-IT.

EZ-Glide 59E Evacuation Chair

The Model 59E EZ-Glide Evacuation Chair helps you quickly and safely transport a seated passenger down stairs and over flat surfaces in an evacuation situation. Belted tracks enable operators to “glide” the chair down stairs instead of carrying it. The durable Model 59E EZ-Glide Evacuation Chair can carry up to 500 lb (227 kg). It is available in a manual version or a power version that features POWERTraxx. The powered track system carries all of the weight, up to 500 lb, up or down stairs. This greatly reduces operator strain and increases operator and passenger safety.
COMPLIANCE
  • SAE J3043 compliant when combined w/ the Secure Lock+

35X PROFlexx Ambulance Cot

Ferno’s 35 PROFlexx, X-Frame cot, has been carefully engineered to provide industry leading stability you need when transferring and transporting patients. A longer, fixed front leg in the X-Frame provides minimal flex and a low center of gravity at all heights. This means you may be less likely to flip or tip a cot during transfers and transport, reducing situations that may cause injury to you or your patient. The PROFlexx can carry 700 lbs. in the transport position and up to 1100 lbs. in the lowest position.

Scoop EXL TSL Extender Kit

The TSL Extender allows you to widen the surface area of the Scoop EXL Stretcher for transferring physically larger patients. With a safe working load of 227 kg and adjustable length, the Scoop EXL is capable of carrying a range of patients, from young to old, small to large. When attached to the head-end, foot-end, or at both ends, the TSL Extender accessory allows the Scoop EXL Stretcher to be extended in shape and width to accommodate larger body shapes and sizes.

PRO F1 Universal Cot Fastener

The PRO F1 Universal Cot Fastener is the first truly SAE-compliant cross-compatible cot fastener.

It is designed for use with the FERNO POWER X1, Stryker Power-PRO™* XT, and Stryker Performance-PRO™* XT ambulance cots. With the PRO F1, you can easily exchange cots between the vehicles in your fleet as needed, knowing that they will be safely secured in compliance with worldwide crash-test standards.

35X-NM PROFlexx Ambulance Cot

The 35X-NM PROFlexx Cot is a flexible, durable medical gurney designed for use in magnetic resonance environments of 3 Tesla or fewer and can also be adapted to transport patients in a ground-based ambulance. The 35X-NM PROFlexx Cot's strong, carefully engineered frame offers exceptional strength and stability. A five-position drop frame reduces the cot’s length by up to 15 inches for movement in confined spaces. Each of the 35X-NM PROFlexx’s four swivel wheels have wheel locks, helping to keep the gurney stretcher stationary during patient transfer and certain medical procedures.

iNLINE Cot Fastening System

The iNLINE Cot Fastening System is designed to protect your crews and patients in the event of an accident and is fully compliant with ambulance safety requirements from the Society of Automotive Engineers (SAE). The iNLINE fastener’s unique track prevents cot drift and eliminates the need to steer the cot when loading and unloading. The iNLINE can also accommodate extreme loading and unloading approach angles or vehicle incline.

30-NM Ambulance Cot

The Model 30-NM Cot is an MR-Conditional cot at 3-Tesla or less and is designed for use in specified MR environments under listed conditions or in specialized medical treatment areas where cots must be Magnetic-Resonance Conditional.

35X-ST PROFlexx Ambulance Cot

The 35XST PROFlexx X-Frame Ambulance Cot offers exceptional safety and stability when transferring and transporting heavy patients. A wider bed surface provides comfort and support for patients of various sizes and increased room for CPR or intubation. The enhanced stability reduces the chances of tips which can potentially lead to injury to patients and caregivers.

Universal Floor Plate

The Universal Floor Plate is easily adaptable to multiple fastening systems to allow a wide variety of cots to be secured in the back of the ambulance.
COMPATIBLE FASTENING SYSTEMS
  •  iNLINE
  • PRO F1
  • 175
  • 173

Model 175 Standard Wall Mount

The Model 175 Antler and Rail Fastening System is designed to limit the movement of a FERNO ambulance cot inside the compartment of a ground-based ambulance.
COMPATIBLE COTS
  •  POWER X1
  • 35X
COMPLIANCE
  • Ambulance Manufacturer’s Division (AMD) of the National Truck Equipment Association Standard 004 (August 2007 edition), Litter Retention System Static Test
  • Federal Ambulance Specification KKK-A-1822 revision F (2007) through Change Notice 7 as applicable
  • Ontario Provisional Land Ambulance & Emergency Response Vehicle Standard 5.0, Section 20.1 Pull Test

Model 175 Standard Floor Mount

The Model 175 Antler and Rail Fastening System is designed to limit the movement of a FERNO ambulance cot inside the compartment of a ground-based ambulance.
COMPATIBLE COTS
  • POWER X1
  • 35X
COMPLIANCE
  • Ambulance Manufacturer’s Division (AMD) of the National Truck Equipment Association Standard 004 (August 2007 edition), Litter Retention System Static Test
  • Federal Ambulance Specification KKK-A-1822 revision F (2007), through Change Notice 7 as applicable
  • Ontario Provisional Land Ambulance & Emergency Response Vehicle Standard 5.0, Section 20.1 Pull Test

Model 175 Universal Wall Mount

The Model 175 Antler and Rail Fastening System is designed to limit the movement of a FERNO ambulance cot inside the compartment of a ground-based ambulance.
COMPATIBLE COTS
  •  POWER X1
  • 35X

Model 175 Universal Floor Mount

The Model 175 Antler and Rail Fastening System is designed to limit the movement of a FERNO ambulance cot inside the compartment of a ground-based ambulance.
COMPATIBLE COTS
  • POWER X1
  •  35X

Pillow Wedge

The Pillow Wedge is designed for use with the LBS Bariatric Board. It provides added comfort for the patient’s lower back by filling the gap between the board and the cot backrest.

Patient Shield

The Patient Shield is specially designed to minimize the transfer of pathogens between patients and patient handlers, equipment and the environment. Requires the delivery of supplemental oxygen, preferably via non-rebreather, to prevent carbon dioxide build-up. Designed for use with the FERNO 35X PROFlexx Ambulance Cot, 35A Ambulance Cot, 93H PROFlexx Ambulance Cot, 93-ES SQUADMATE, and POWERFlexx.

Patient and Cot Cover

The Ferno Patient/Stretcher Cover protects bedding, equipment and will keep patients dry in inclement weather. It is made from lightweight, coated nylon the cover contains a dual zip that opens from both ends to access patient or equipment. The cover can be rolled or folded and stuffed into its self-contained storage pouch which can be attached to the stretcher with the integral Velcro attachment straps. The Ferno Patient/Stretcher Cover has a full length, elasticized rim and outer Velcro straps that allows it to be fitted to any cot or basket stretcher or patient.

Leg Strap

Leg restraint for Model 42 Chair, Model 40 Chair, and Model 107 Series Ambulance Stretcher Chairs.

Model 11 Stretcher with Wheels

The Model 11 is a simple, flat, foldable stretcher useful for transferring patients who have no suspected spinal injury. Features include a lightweight aluminum frame, two folding posts at the head-end of the stretcher, and 2 folding wheels at the foot-end. Stretcher surface is a heavy-duty, bacteriostatic, vinyl-coated nylon. Orange