PRO F1 Universal Cot Fastener
The PRO F1 Universal Cot Fastener is the first truly SAE-compliant cross-compatible cot fastener.
It is designed for use with the FERNO POWER X1, Stryker Power-PRO™* XT, and Stryker Performance-PRO™* XT ambulance cots. With the PRO F1, you can easily exchange cots between the vehicles in your fleet as needed, knowing that they will be safely secured in compliance with worldwide crash-test standards.
Model 175 Universal Floor Mount
The Model 175 Antler and Rail Fastening System is designed to limit the movement of a FERNO ambulance cot inside the compartment of a ground-based ambulance.
COMPATIBLE COTS
- POWER X1
- 35X
Model 175 Universal Wall Mount
The Model 175 Antler and Rail Fastening System is designed to limit the movement of a FERNO ambulance cot inside the compartment of a ground-based ambulance.
COMPATIBLE COTS
- POWER X1
- 35X
Stainless Steel Carabiner
The Most Corrosion-Resistant Carabiner Available
Patented
100% Stainless Steel
ANSI-Certified Version Available
If you work in some of the toughest conditions imaginable and need a carabiner that is ready to perform no matter how harsh the environment, this is the model you’ve been waiting for. Made of 100% stainless steel, including internal parts such as pins and springs, this carabiner is compact enough to operate easily with one hand and has a side-swing gate. The non-ANSI version will fit over a standard litter rail. The key-lock design eliminates snagging, and the three-stage auto-locking gate has a visual locking indicator. Ours is the only stainless carabiner with the highest NFPA strength rating—General Use.
Every carabiner is proof loaded.
Technical Rescue Field Operations Guide
4th Edition by Tom Pendley
Now in its fourth edition, this guide covers the broad spectrum of rescue incidents to which firefighters respond. Separation of the skills by Awareness, Operational, and Technician levels helps users perform within their training level. Checklists help organize planning, making sure all the critical elements are addressed. Printed on water and tear-proof paper. 160 pages.
About Our Selection of Books
We have compiled an outstanding selection of books on rescue. However, there is no substitute for proper training and time in the field for gaining the skills needed to provide safe and effective emergency assistance.
Please Note: CMC Rescue recognizes that there are many different techniques in rescue. While our book selection reflects the leading authorities and most popular texts, as with all publications, recent developments in equipment and practices may not be included.
Kwik Klip Patient Restraint System
The Kwik Klip Patient Restraint System is designed to quickly and safely secure a patient on the EZ-Glide Stair Chair, EZ-Glide Stair Chair with POWERTraxx, and 59E EZ-Glide Evacuation Chair. Continuous left and right straps attach to the top of the chair's back frame, crisscross the patient's chest, anchor to a connector strap at each side of the chair seat, then buckle across the patient's lap.
ResQmax Line Deployment Kit
The ResQmax Kit 410 is a Line Deployment Kit supplied with two payloads and all the accessories required to operate the ResQmax.
This kit comes complete with spares and a Kit Carry Bag for easy transport and storage. Optional accessories include the ResQmax Tool Kit, and a Rigid Transport/Storage Case. Additional projectiles and lines are available with all of the ResQmax Kits.
ResQmax Surf Rescue Line Deployment Kit
The ResQmax Kit 411 is a Surf Rescue / Messenger Line Deployment Kit supplied with two payloads and all the accessories required to operate the ResQmax. The Dacron Line is a messenger line which allows for long range horizontal deployment distances of 400ft / 122m. This line can be used to tow larger, stronger ropes across a body of water or from ship-to-shore. The Polypropylene Line has a stronger test strength of 1,100 lbs / 500 kg and is intended to be used in water-based operations which require the line to float. This line, when coupled with the Sling Projectile, becomes an effective way to assist a distressed swimmer who may be caught in a rip tide by delivering the ResQmax Sling within seconds. The Auto-Inflating Sling has a mechanism which inflates the Sling on contact with water. The ResQmax Streamline Filler Hose facilitates charging the Projectiles with compressed air from an Air Compressor, an SCBA Tank, or a SCUBA Tank. The service pressure of these Projectiles is 3,000 psi / 207 bar.
RESQMAX Swiftwater Rescue Kit
The Sling Projectile inflates on contact with the water to become a flotation collar for the subject or, at minimum, an easy-to-hold floating ring. The 300-foot (91-m) 8-mm Polyspectra line floats and has a tensile strength of 9.8 kN (2,200 lbf). The average launch distance with the sling projectile is 200 feet (61 m).
ResQmax Marine Vessel Messenger Line Kit
The ResQmax Kit 416 is a Marine Vessel Line Deployment Kit supplied with two payloads and all the accessories required to operate the ResQmax. The Dacron Line is a messenger line which allows for long range horizontal deployment distances of 400ft / 122m. This line can be used to tow larger, stronger ropes across a river or other fast moving body of water. The Polypropylene Line has a stronger test strength of 1,100 lbs / 500 kg and is intended to be used in water-based operations which require the line to float. This line, when coupled with the Sling Projectile, becomes an effective way to assist in a man-overboard situation by delivering the ResQmax Sling within seconds. The Auto-Inflating Sling has a mechanism which inflates the Sling on contact with water. The ResQmax Streamline Filler Hose facilitates charging the Projectiles with compressed air from an Air Compressor, an SCBA Tank, or a SCUBA Tank. The service pressure of these Projectiles is 3,000 psi / 207 bar.
NFPA Throwline Bag Set
CMC’s NFPA Throwline Bag Set combines the CMC Rescue NFPA Throwline* with our economical pack cloth bag. The 8-mm diameter line allows for a very compact throw bag. It is available for both 50′ and 75′ of throwline.
Redi-Line Throwline Bag Set
There should be a throwline in every patrol car, municipal truck, and fire apparatus, and the Redi-Line Bag Set makes preparedness affordable. The pack cloth bags feature our quick-release strap and top handle for easy throwing. An Ethafoam disc provides flotation.
SRT Throwline Bag Set
This set features our SRT Throwline, a multi-use water rescue line, in several lengths and types of bags. The handle makes for easy and accurate throwing and has a quick-release buckle to attach the bag to a boat or PFD. The pack cloth and mesh bags both have an Ethafoam disk for added flotation. The unique EZ-Stuff bag has integral flotation, a side grommet, and a reflective stripe.
NFPA Throwline
Designed to meet the NFPA 1983 specification for a floating water rescue throwline, our NFPA Throwline, made with a Dyneema core and polypropylene sheath, handles extremely well. The bright yellow color is highly visible.
Traverse Flotation Collar
The flotation collar that folds around the outer head end perimeter of basket stretchers to assist rescuers in keeping the patients head above water line.
Patient and Cot Cover
The Ferno Patient/Stretcher Cover protects bedding, equipment and will keep patients dry in inclement weather.
It is made from lightweight, coated nylon the cover contains a dual zip that opens from both ends to access patient or equipment. The cover can be rolled or folded and stuffed into its self-contained storage pouch which can be attached to the stretcher with the integral Velcro attachment straps.
The Ferno Patient/Stretcher Cover has a full length, elasticized rim and outer Velcro straps that allows it to be fitted to any cot or basket stretcher or patient.
Model 175 Standard Floor Mount
The Model 175 Antler and Rail Fastening System is designed to limit the movement of a FERNO ambulance cot inside the compartment of a ground-based ambulance.
COMPATIBLE COTS
- POWER X1
- 35X
COMPLIANCE
- Ambulance Manufacturer’s Division (AMD) of the National Truck Equipment Association Standard 004 (August 2007 edition), Litter Retention System Static Test
- Federal Ambulance Specification KKK-A-1822 revision F (2007), through Change Notice 7 as applicable
- Ontario Provisional Land Ambulance & Emergency Response Vehicle Standard 5.0, Section 20.1 Pull Test
Model 175 Standard Wall Mount
The Model 175 Antler and Rail Fastening System is designed to limit the movement of a FERNO ambulance cot inside the compartment of a ground-based ambulance.
COMPATIBLE COTS
- POWER X1
- 35X
COMPLIANCE
- Ambulance Manufacturer’s Division (AMD) of the National Truck Equipment Association Standard 004 (August 2007 edition), Litter Retention System Static Test
- Federal Ambulance Specification KKK-A-1822 revision F (2007) through Change Notice 7 as applicable
- Ontario Provisional Land Ambulance & Emergency Response Vehicle Standard 5.0, Section 20.1 Pull Test
Rescuer Pocket Resuscitator
Clear plastic, with soft inflated cuff and fold down top, designed to fit adult or child No assembly required Patented
Model 514 Oxy-Clip
Designed to place the oxygen cylinder on the cot sidearm rather than underneath the cot or between the patient's legs. Securely holds either steel or aluminum D size cylinders. Spring-loaded latch enables the Oxy-Clip™ to instantly attach to the cot sidearm (19 mm/0.75 in diameter)
Model 521 Oxygen Cylinder Holder (Universal Bracket Base)
Designed to change with your needs, Ferno’s universal oxygen cylinder bracket accommodates steel and aluminum cylinders including “D”, “E” and Jumbo “D” sizes. Meets KKK-1822-C specifications. Constructed of stainless steel and aluminum alloy, will not rust or corrode. Universal bracket base adapts to cylinder size. Neck support bracket is changed with common tools to fit either “D” or “E” size cylinders. Universal oxygen cylinder bracket does not interfere with most oxygen regulator controls. Heavy-duty nylon strap and metal buckle keep cylinder in place. Bracket can be mounted vertically or horizontally.
O-Two Pulse Oximeter
Designed for use in a wide range of environments – from pre-hospital emergency to hospitals and home health care. Designed to fit a wide range of patient sizes from pediatric to adult with minimal clamping pressure to maintain skin integrity and circulation.
Includes Belt Case, 2 Landyards, and 2 Batteries.
Oxygen Cylinder Brackets
Wall-mounted cylinder holders securely hold either “D” or “E” size oxygen cylinders in place. Choose from the single or dual holder. Wall mounted base provides secure retention system and eliminates swaying, tipping, and rattling oxygen cylinders.
Oxygen Cylinder Restraint, Foot-end
The oxygen cylinder mount can carry a D or Jumbo D-sized portable oxygen cylinder, up to a maximum 5.3 inches in diameter by 18.75 inches in length (135 mm diameter x 476 mm length). Spiracle Technology’s “DD-Lite” oxygen cylinder is also compatible with this oxygen cylinder mount.
Oxygen Cylinder Holder, Foot-end
The PROFlexx 35-P Oxygen Bottle Holder securely holds D, Jumbo D, and FERNO DD-Lite oxygen cylinders. Allows you to add an oxygen holder to the 35X PROFlexx Ambulance Cot or 93H PROFlexx Ambulance Cot.
Oxygen Cylinder Holder, Head-end
The oxygen cylinder mount can carry a D or Jumbo D-sized portable oxygen cylinder, up to a maximum 5.3 inches in diameter by 18.75 inches in length (135 mm diameter x 476 mm length). Spiracle Technology’s “DD-Lite” oxygen cylinder is also compatible with this oxygen cylinder mount.
Patient Cover
The Traverse Rescue Patient Cover protects the patient from rain, wind, sleet and snow while still giving easy access through the double zipper centre opening to monitor the patient’s condition or treat their injuries. Made from coated nylon and held in place by an elastic rim and Velcro attachment straps, the Patient Cover can be rolled up and stuffed into it’s own storage pouch which can be attached to the stretcher with the Velcro attachment strap. Colour: Royal Blue
Patient Cover with Handles
The Traverse Rescue Patient Cover protects the patient from rain, wind, sleet, and snow while still giving easy access through the double zipper center opening to monitor the patient’s condition or treat their injuries. Made from coated nylon. The cover would be placed inside the rescue litter allowing the patient to lie inside the cover and enclose the body. 6 handles to allow ease of patient transport. Colour: Black/Orange
Traverse Rescue Split-Apart Litter Covers
The Traverse Rescue Litter Cover protects the basket stretcher from the environmental elements, whether you store it on the top of your rescue vehicle or on a job site. It is designed with ample room to allow for the storage of backboards, splints, blankets and other stretcher accessories and comes with 6 reinforced carry handles and two compression straps.
SKED-EVAC Tripod Carrying Case
Vinyl transport bag for storing and carrying your SKED-EVAC® Tripod (SK-700). Features heavy duty vinyl coated nylon material and an extra long zipper along it’s full length and across it’s ends to facilitate easy repackaging. It has a pocket inside in the center to store the bag of chain which comes with the tripod, preventing the chain from sliding to one end when the tripod is carried. There are handles in the center and on each end of the bag. This bag has a 9″ diameter and a 7’1″ length, and will make nearly any brand of tripod easier to carry.
Pinnacle Confined Space Rescue Litter
The Pinnacle Rescue Litter is the world’s lightest rigid stretcher for confined space rescue. Its narrow design allows for entry into and egress from most confined spaces. Available as One-Piece or Split-Apart.
Prusik Cord & Load Release Hitch Cord
The most important attribute of a cord used for Prusik hitches is consistency in handling, diameter and strength. Once you have determined the Prusik hitch that works best on your host rope, you want the same performance every time you replace it.
Redi-Line Throwline
An excellent choice for shore-based responders, this cost-effective polypropylene line features hollow-braid construction, which makes it easy to handle and stuff into throw bags. Its red/white stripe is highly visible in or out of the water. With life-safety equipment this reasonably priced, you can afford to have a throwline in every patrol car, municipal truck or fire apparatus.
Rope is sold by the foot. Please contact customer support for maximum length available.
Throwlines: A Safe Choice
A throwline bag is the safest way to reach a subject in fast-moving or still water. It provides a downstream safety backup when rescuers must enter the water. Throwbags should be kept in patrol cars, ambulances, and other emergency response vehicles.
Steel Locking D Carabiners
Our Steel Locking D Carabiners are proven workhorses for rescue and rope access applications. Certified to NFPA – General Use, these carabiners are available in both Screw-lock and Auto-lock gate models that feature an improved key-lock nose to prevent snagging while loading or unloading. These standard-sized carabiners can be easily opened with one hand with a gate opening wide enough to fit over most litter rails. Heat-treated and built to exacting standards, every carabiner is proof loaded.
Reflective Rit Line
We’ve improved the already high visibility of our Technora and polyester RIT Line by adding a strand of highly reflective 3M tape. The Technora strands provide high strength in adverse conditions. The line is supple enough to pack easily, but firm enough to feel against the floor when following it in low-visibility conditions when wearing gloves. Technora chars at 900° F (482° C). Polyester melts at 480° F (249° C).
Rope is sold by the foot. Please contact Customer Support for maximum length available.
S301 Sager Super Form III Single
Model S301 Sager Form III Single Emergency Traction Splint is use for femoral fractures and on proximal third and midshaft femoral fractures.