Oxygen Cylinder Holder, Foot-end
The PROFlexx 35-P Oxygen Bottle Holder securely holds D, Jumbo D, and FERNO DD-Lite oxygen cylinders. Allows you to add an oxygen holder to the 35X PROFlexx Ambulance Cot or 93H PROFlexx Ambulance Cot.
Oxygen Cylinder Holder, Head-end
The oxygen cylinder mount can carry a D or Jumbo D-sized portable oxygen cylinder, up to a maximum 5.3 inches in diameter by 18.75 inches in length (135 mm diameter x 476 mm length). Spiracle Technology’s “DD-Lite” oxygen cylinder is also compatible with this oxygen cylinder mount.
Patient Cover
The Traverse Rescue Patient Cover protects the patient from rain, wind, sleet and snow while still giving easy access through the double zipper centre opening to monitor the patient’s condition or treat their injuries. Made from coated nylon and held in place by an elastic rim and Velcro attachment straps, the Patient Cover can be rolled up and stuffed into it’s own storage pouch which can be attached to the stretcher with the Velcro attachment strap. Colour: Royal Blue
Patient Cover with Handles
The Traverse Rescue Patient Cover protects the patient from rain, wind, sleet, and snow while still giving easy access through the double zipper center opening to monitor the patient’s condition or treat their injuries. Made from coated nylon. The cover would be placed inside the rescue litter allowing the patient to lie inside the cover and enclose the body. 6 handles to allow ease of patient transport. Colour: Black/Orange
Traverse Rescue Split-Apart Litter Covers
The Traverse Rescue Litter Cover protects the basket stretcher from the environmental elements, whether you store it on the top of your rescue vehicle or on a job site. It is designed with ample room to allow for the storage of backboards, splints, blankets and other stretcher accessories and comes with 6 reinforced carry handles and two compression straps.
SKED-EVAC Tripod Carrying Case
Vinyl transport bag for storing and carrying your SKED-EVAC® Tripod (SK-700). Features heavy duty vinyl coated nylon material and an extra long zipper along it’s full length and across it’s ends to facilitate easy repackaging. It has a pocket inside in the center to store the bag of chain which comes with the tripod, preventing the chain from sliding to one end when the tripod is carried. There are handles in the center and on each end of the bag. This bag has a 9″ diameter and a 7’1″ length, and will make nearly any brand of tripod easier to carry.
Pinnacle Confined Space Rescue Litter
The Pinnacle Rescue Litter is the world’s lightest rigid stretcher for confined space rescue. Its narrow design allows for entry into and egress from most confined spaces. Available as One-Piece or Split-Apart.
Prusik Cord & Load Release Hitch Cord
The most important attribute of a cord used for Prusik hitches is consistency in handling, diameter and strength. Once you have determined the Prusik hitch that works best on your host rope, you want the same performance every time you replace it.
Redi-Line Throwline
An excellent choice for shore-based responders, this cost-effective polypropylene line features hollow-braid construction, which makes it easy to handle and stuff into throw bags. Its red/white stripe is highly visible in or out of the water. With life-safety equipment this reasonably priced, you can afford to have a throwline in every patrol car, municipal truck or fire apparatus.
Rope is sold by the foot. Please contact customer support for maximum length available.
Throwlines: A Safe Choice
A throwline bag is the safest way to reach a subject in fast-moving or still water. It provides a downstream safety backup when rescuers must enter the water. Throwbags should be kept in patrol cars, ambulances, and other emergency response vehicles.
Steel Locking D Carabiners
Our Steel Locking D Carabiners are proven workhorses for rescue and rope access applications. Certified to NFPA – General Use, these carabiners are available in both Screw-lock and Auto-lock gate models that feature an improved key-lock nose to prevent snagging while loading or unloading. These standard-sized carabiners can be easily opened with one hand with a gate opening wide enough to fit over most litter rails. Heat-treated and built to exacting standards, every carabiner is proof loaded.
Reflective Rit Line
We’ve improved the already high visibility of our Technora and polyester RIT Line by adding a strand of highly reflective 3M tape. The Technora strands provide high strength in adverse conditions. The line is supple enough to pack easily, but firm enough to feel against the floor when following it in low-visibility conditions when wearing gloves. Technora chars at 900° F (482° C). Polyester melts at 480° F (249° C).
Rope is sold by the foot. Please contact Customer Support for maximum length available.
S301 Sager Super Form III Single
Model S301 Sager Form III Single Emergency Traction Splint is use for femoral fractures and on proximal third and midshaft femoral fractures.
S304 Sager Super Form III Bilateral
The S304 Sager Form III Bilateral Emergency Traction Splint is indicated for use on proximal third and midshaft femoral fractures.
S323 Sager Carry Case for S301 & S304, Blue
Carry Case for the S301 and S304 Traction Splints.
S324 Sager Ischio Perineal Cushion
Ischio Perneal Cushion for the S301, S304 and SX405 Traction Splints.
S345 Sager Pedal Pinion Figure 8 Strap, 60″
Pedal Pinion Figure 8 Strap for the S301, S304 and SX405 Traction Splints.
S357 Sager Abduct Bridle Thigh Strap
Abduct Bridle Thigh Strap for the S301, S304 and SX405 Traction Splints.
Sager Ankle Harnesses
Ankle Harnesses for the S301, S304, and SX405 Traction Splints
SAM ChitoSAM Hemostatic Dressing
ChitoSAM™ 100 is a high performance 100% chitosan hemostatic dressing designed to stop lethal bleeding fast. It is easy to use, extremely effective, and safe. ChitoSAM™ 100 works independently of the body’s normal clotting processes. ChitoSAM™ 100 is made of non-woven, 100% chitosan.
SAM Junctional Tourniquet
Model JT400-EN: 2 TCD, 1 TCD Extender, 1 Hand Pump and Aux Strap, Bag
NSN# 6515-01-618-7475
SKED-EVAC Aluminum Cobra Buckle Conversion Kit
Skedco now offers a complete conversion kit that includes six patented AustriAlpin Cobra™ quick release buckles. These lightweight aluminum side-release buckles are dependable and strong enough to meet the needs of securing a patient into a Sked® stretcher without the danger of breakage. The buckles are rated at 3,000 lbs. and are difficult to release while under tension. By using the Cobra buckle system, you will no longer have to weave the webbing through the buckles when packaging a patient, therefore patient packaging is often done in about half of the time as when using the original steel buckles. The Cobra buckle straps girth-hitch onto the Sked stretcher for quick and easy installation.
SKEDCO Oregon Spine Splint II
Developed by Skedco for use with the Sked Stretcher, the OSS II fits inside a rolled up stretcher. Skedco states “the OSS II is the safest, most effective vest-type extrication and immobilization device available today.” Includes a shoulder board that prevents compression of a patient in a Sked stretcher. Excellent immobilization of the head and cervical spine, and when used with the Sked, functions as a long spine board. Built to last under rugged conditions. Can be cleaned with common bleach solutions. X-ray translucent. Instructions included.
Ferno Frac Cardboard Splint
The Ferno Frac Splint is a low cost, compact and convenient leg splint that can be shaped to fit all leg sizes.
The waxed cardboard is water resistant, X-ray transparent and MRI compatible. The Ferno Frac Splint folds and locks into position to offer ankle and foot support. Packs flat ready for use.
One size can be shaped to suit all.
Ferno Elastic Splint Strap
The Ferno Elastic Splint Straps allow first responders and paramedics to quickly and easily secure a wide variety of splinting and immobilization devices. The Velcro patches allow the Splint Strap to be secured to itself or multiple straps can be attached to one another in series to form a longer Strap if needed.