New England Ropes KM III
A superior handling rescue rope, New England Ropes KM III static kernmantle rope features composite construction, with the continuous filament polyester sheath braided over a continuous nylon fiber core. Featuring a weight-balanced construction with the sheath and the core each representing half the total weight, KM III is torque-balanced to eliminate any spin during a rappel. This provides excellent handling and knot-holding characteristics, as well as rugged protection from abrasion and cutting. The polyester sheath provides added protection from ultraviolet light and chemicals harmful to nylon, while reducing the strength loss and weight gain that occurs when nylon absorbs water.
Rope is sold by the foot. Please contact customer support for maximum length available.
Static-Pro Lifeline
An extremely low-stretch kernmantle rescue lifeline constructed of 100% High Tenacity Polyester (HTP) fiber. The polyester fibers do not absorb water, so there is no loss of strength or increase in weight if the rope gets wet. With less than 2% stretch at 300 lbf, Static-Pro is an excellent choice for high lines, long rappels, and many mechanical advantage haul systems. Polyester fiber ropes have better resistance to acids than nylon, which makes Static-Pro the preferred choice in acidic environments. Favored for its excellent hand, knotability and UV resistance, Static-Pro Lifelines come in solid colors with a single stripe to prevent confusion with CMC Lifeline and other solid color kernmantle ropes.
*Rope is sold by the foot. Please contact customer support for maximum length available.
Flat Web
We’ve been using our one-inch flat web in our rescue classes for several years and it’s proven to be an excellent performer. While not all flat webs will hold knots securely, the CMC Rescue Flat Webbing has been specifically selected for the suppleness necessary to allow knots to be set securely. Flat web also tends to be easier to untie after a heavy load than the softer tubular web. While the flat web is bulkier than the tubular, it does provide a significantly higher strength. Available by the foot or roll.
NOTE Industry standards allow for up to three sections per roll.
Tubular Webbing
Mil-Spec Needle Loom Nylon Web
After thorough investigation, which included reviewing web construction, manufacturer’s tests, and performing our own field evaluations, it has been determined that the mil-spec needle loom web we now offer is comparable in strength and abrasion resistance to the previous-generation shuttle loom (spiral weave) web.
All one-inch web is sold by the foot, with a maximum spool length of 300′.
Our red #200203 two-inch web is sold by the 150′ (50-yard) spool.
Note: Military standards allow for up to three sections per spool.
AZ Bound-Loop Prusiks
Years of development, testing and fine tuning has made our Prusik cord a preferred choice by rescue schools, agencies and rescuers alike. Our sewn Prusiks offer unmatched performance—with strength equivalent to a tied Prusik loop, just without the cumbersome knot. The factory-sewn SecureStitch is covered with durable clear shrink tubing that allows regular inspection and helps protect the stitching for longer life. Some rescuers prefer a bound-loop style Prusik for cinching the attachment bight around the carabiner to help snug the Prusik to the connector. Our AZ Bound-Loop Prusiks are identical to our Sewn Loop Prusiks except that the shrink tube captures both sides of the loop while allowing adjustment.
Sewn-Loop Prusiks
Years of development, testing and fine tuning has made our Prusik cord a preferred choice by rescue schools, agencies and rescuers alike. Our Sewn-Loop Prusiks offer unmatched performance—with strength equivalent to a tied Prusik loop, just without the cumbersome knot. The factory-sewn SecureStitchTM is covered with durable clear shrink tubing that allows regular inspection and helps protect the stitching for longer life. These loops are produced with our 8mm Prusik cord.
Ladder Line
Our Ladder Line’s spun polyester sheath provides a secure grip with or without gloves, wet or dry. Excellent resistance to UV, rot and mildew extends its service life. Splice or use our Halyard Clamp for easy installation. White with a red tracer.
Rope is sold by the foot. Please contact customer support for maximum length available.
NFPA 1931 specifies an MBS of 825 lbf for halyards
KASK Zenith Helmet
(E-RATED) ANSI Z89.1-2014 / CSA Z94.1-2015
The Kask Zenith helmet features a non-vented ABS external shell to offer the ultimate in head protection for falls, impact and electrical hazards. The Zenith provides improved features for the ultimate in comfort, fitment and functionality.
Kask Superplasma HD Helmet
The Newest Evolution in Rescue Helmets!
ANSI Z89.1-2014 / CSA Z94.1-2015
The Kask SuperPlasma HD helmets have been specifically designed for professional rescue and work-at-height applications. They are lightweight, compact, amazingly comfortable and well-ventilated with 10 air intakes, equipped with protective aluminum anti-intrusion grills to deflect debris and water.
Kask Helmet Decal Set
Customize your KASK rescue helmet while adding increased night visibility. Decals are manufactured from high-quality 3M reflective material and die-cut for easy installation. Decals have been tested and approved for use by helmet manufacturer. Available in three styles; FIRE RESCUE, USAR and SAR.
Die-cut decals, 12 items per 8” x 10” sheet, custom designed for use on KASK SuperPlasma and Zenith helmets. Included blank decals can be customized using a permanent marking pen. Priced per decal set (1 sheet).
Essential Gloves
CMC’s Most Durable Rope Rescue and Rope Access Glove
A glove that lets you do it all, the Essential Glove is feature-rich with touch screen compatible fabric and a thumb sweat wipe. This is CMC’s most durable and long-lasting glove. The leather palm protects from heat, moisture, cold, and abrasion; and a second layer reinforces high wear areas to withstand rope work, rappelling, and tool use. Point construction at the finger tips contours the glove around the hand, delivering dexterity through the full range of motion. The fit is further adjusted and securely fastened by a burly Velcro wrist closure over an elastic cuff. The back of the glove is breathable mesh for keeping hands cool and dry. When not in use, the Essential Glove can be clipped to harnesses and packs through the carabiner hole in the wrist cuff. The Essential Glove lets you do more with your gloves on, minimizing distractions, delays, and exposure at the job site.
Rappel Gloves
Outstanding hand protection meets dexterity in our Rappel Gloves. Wear them to tie knots and work with hardware, set up a system or to rappel. Pittard’s Armor-Tan leather and unique Kevlar® brand fiber stitching combine for unparalleled durability. A double layer at the thumb web protects hands when rappelling, and the wear-resistant double palm guards against heat, moisture, cold, and abrasion. Its second anatomically segmented layer eases grip fatigue. The back is equally detailed: spandex ventilates and delivers flexibility and comfort, while elastic at the wrist provides a secure fit. When not in use, these gloves can hang on harness gear loops using the carabiner loops sewn into the wrist. Space on the label allows for user’s name or initials.
Riggers Gloves
These gloves’ synthetic leather palm has the dexterity of a light glove and the durability and hand protection of a much heavier leather glove. The pre-curved anatomic design offers a close, comfortable fit, making it easy to work with knots and hardware, yet still provide hand protection when operating a belay system, hauling on the main line or for rappels, chain saw and power tool operation, and busting brush. The mesh back adds comfort and helps to keep the hands cooler, while elastic on the wrist provides a secure fit. Using the carabiner loops attached at the wrist, the gloves can be hung on harness gear loops when not in use. The gloves are machine washable for easy cleanup. Space on the label allows for user’s name or initials.
Alta Superflex Knee Pads
Because emergency workers spend an inordinate amount of time working on their knees—this is particularly true of heavy rescue operations, confined space entries, or tactical responses— Alta Superflex Knee Pads are a must-have. Lightweight but with a full 1/2 inch of foam padding, they reduce stress and fatigue to the knees, allowing you to work longer and more effectively. The rubber caps grip the surface to prevent sliding, and a unique, easy-to-use buckle fastening system allows a comfortable fit that minimizes interference with circulation to the lower legs.
Dualcom Radio Harness
Years of our own proven in-the-field experience and valued customer feedback have helped CMC develop the most advanced dual-communication radio chest harness on the market. Ergonomically designed for all-day comfort, our DualCom Radio Harness is constructed from tough, durable CORDURA nylon with a soft, breathable D3 mesh backing to provide all-day user comfort. This intelligent harness keeps a variety of communication devices and field necessities close at hand.
Radio Holster
Our versatile Radio Holster can be carried on the belt using the loop slot or over the shoulder when looped through webbing. Dual hook-and-loop straps allow it to fit on the shoulder strap of your pack or full-body harness. The unique, universal fit radio pocket is easy to adjust and holds most models of radios securely while allowing access to all knobs, front-mounted keypads, and displays. Color: Black.
Rigtech Pack
Stay light, fast and ultra organized with the innovative RigTech Pack. The pack was designed to fulfill ongoing requests from rescue teams around the country in need of a specialized solution for keeping their rigging equipment in order and securely loaded when in the field. The full-featured backpack delivers uncompromised comfort, stability and organization for backcountry and urban rescue and REM teams as well as rope access technicians.
Triskellion Tripod
The CMC Triskelion is the first industrial rescue tripod certified to NFPA standards and the new benchmark for rapid deployment, ease of use, and versatility. With its 5.5-10 ft working height, additional CE certifications, and accessible features, the Triskelion delivers greater safety and efficiency for confined space and industrial rescues.
Arizona Vortex Kit
Named for its origin in the rugged Red Rock highlands of northern Arizona, the Arizona Vortex Kit is a unique multipod that was created from years of experimental development. The Vortex represents the pinnacle of at-the-edge frames, which no standard multipod can match today. The recently improved Vortex Bag System allows a single rope technician to carry the entire Vortex Kit using our RigTech Pack™ and 2 redesigned Leg Bags.
SKED-EVAC Industrial Tripod
Manufactured by Skedco, makers of the Sked® Stretcher, the Sked-EVAC tripod features aircraft-grade, gold-anodized aluminum legs and a cast-aluminum head. Three heavy-duty rigging anchors, located in the center, have exceptionally large holes for easy attachment. Legs adjust in 5-in (127-mm) increments for a maximum height of 10 ft (3 m) and a minimum length for transport of 7 ft (2.1 m). The cast ladder feet swivel and come with a choice of a sure-grip rubber pad or a point for imbedding in a soft or slippery surface. Holes in the feet allow the tripod to be bolted into position. A safety chain prevents leg movement and adjusts with a screw link. The optional Winch Bracket connects DBI/Sala Salalift II Winch or SRL to a Sked-EVAC Tripod.
Harkens Winch Lockhead Kit
A CERTIFIED SELF-TAILING, MAN-RIDING CAPSTAN WINCH WITH THE SECURITY AND SAFETY OF AN INNOVATIVE CAPTIVE HEAD
The Harken LokHead Winch Kit (NFPA Technical Use) is a man-riding portable capstan winch specifically designed for confined space rescue retrieval or for use with davit systems using an unlimited length of life safety rope. The captive head allows the winch to be used safely, and keeps the rope from accidentally coming off the winch and releasing. The LokHead Winch Kit comes complete with everything needed for a tripod setup.
Harkens Riggers 500 Winch
The Harken Riggers Winch provides the user with a lightweight, CE certified, portable winch mounted to a robust adapter plate. The 2-speed 500 model is lightweight and weighs just 7 kg (15.4 lb). Its maximum rated load of 490 kg (1,101 lb) maximizes operator pulling power by up to 40 times. Multiple mounting options provide versatility when working in challenging or remote environments. The pigtail line lead allows the rope to be installed without feeding the end of the line through with no maximum line length and ensures correct alignment and loading of the winch for maximum efficiency. Stainless steel load-carrying gears and pins for strength and durability. The unique drum design maximizes grip on the rope. Includes a universal mounting plate, 25 cm (10 in) winch handle, and Harken 40.2 winch model.
AZORP Kit (Arizona Omni Rigging Pod)
The newest companion to the Arizona Vortex, the AZORP (Arizona Omni Rigging Pod) allows even greater versatility to the AZV system. The AZORP was developed by Reed Thorne and has undergone extensive testing and rigging applications with Ropes That Rescue around the world. This two-in-one rigging pod is a welcome addition to the AZV lineup and combines the versatility of having two component halves that can be used in combination, or separately, at different positions on the inner or outer AZV legs. Machined from one solid block of T-6 aluminum, it delivers superior strength with a sleek and simple design without using welds. The inner and outer AZORP pods can also be used together as a two-flange rigging pod in combination with an AZV leg compression member.
The AZORP Storage Bag features a quick-draw closure and an external carabiner loop. The main compartment has a separate sewn-in pocket to hold the AZORP quick pins. Constructed of tough, water-resistant 1,000-denier CORDURA® nylon.
Anchor Plate
A Classic CMC Innovation
A CMC original design that has withstood the test of time, our Anchor Plates keep the carabiners holding the different parts of your rescue system from jamming together. The hardware becomes easier to see, making safety checks more accurate. It can also keep you from clipping a carabiner into the wrong loop of the anchor web. For anchor systems, it makes an excellent collection point. We use the Anchor Plate in CMC Rope Rescue classes, which allows our students to set up systems faster with fewer mistakes. Hole diameters: small – 7/8 in (22 mm), large – 2 in (51 mm).