SKED-EVAC Aluminum Cobra Buckle Conversion Kit
Skedco now offers a complete conversion kit that includes six patented AustriAlpin Cobra™ quick release buckles. These lightweight aluminum side-release buckles are dependable and strong enough to meet the needs of securing a patient into a Sked® stretcher without the danger of breakage. The buckles are rated at 3,000 lbs. and are difficult to release while under tension. By using the Cobra buckle system, you will no longer have to weave the webbing through the buckles when packaging a patient, therefore patient packaging is often done in about half of the time as when using the original steel buckles. The Cobra buckle straps girth-hitch onto the Sked stretcher for quick and easy installation.
SKEDCO Oregon Spine Splint II
Developed by Skedco for use with the Sked Stretcher, the OSS II fits inside a rolled up stretcher. Skedco states “the OSS II is the safest, most effective vest-type extrication and immobilization device available today.” Includes a shoulder board that prevents compression of a patient in a Sked stretcher. Excellent immobilization of the head and cervical spine, and when used with the Sked, functions as a long spine board. Built to last under rugged conditions. Can be cleaned with common bleach solutions. X-ray translucent. Instructions included.
PMI Bokat Rope Washer
The plastic body clamps over the rope and cleans it with a combination of water pressure and brushing action. The inside is lined with AstroTurf®, which scrubs the rope as it is pulled though the washer. The PVC housing is made with a flexible vinyl hinge co-extruded for longevity. Hook-and-loop fasteners adjust for different rope and hose diameters up to 3/4 in (19 mm).
Working-At-Height / Industrial Rope Access / Technical Rope Rescue
Working at height requires reliable, quality equipment. The PMI Bokat Rope Washer can be used to wash the rope used with equipment and hardware in work-at-height maneuvers, industrial rope access or technical rope rescue. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.
Rope I.D. Markers
Write, type, or stamp information on the 3/4 x 1-in (19 x 25 mm) white area. The clear self-laminating portion wraps around to protect writing. Works on rope up to 5/8-in (16 mm) diameter. For permanence, we recommend that you apply two or three coats of clear Whip-End Dip over the marker. 60 markers per book.
Working-At-Height / Industrial Rope Access / Technical Rope Rescue
Working at height requires reliable, quality equipment. Rope I.D. Markers can be used to mark the rope to be used with equipment and hardware in work-at-height maneuvers, industrial rope access or technical rope rescue. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.
Whip-End Dip Rope Sealer
Designed to seal the end of a rope to prevent fraying or unraveling, Whip-End Dip’s water-based formula is environmentally friendly and easy to clean up. On rescue rope, the clear formula is used to seal the Rope I.D. Marker or other rope-end identification. The sealer comes with a brush for application.
Working-At-Height / Industrial Rope Access / Technical Rope Rescue
Working at height requires reliable, quality equipment. The Whip-End Dip Rope Sealer can be used to seal rope that is used with hardware in work-at-height maneuvers, industrial rope access or technical rope rescue. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.
Shrink Tubing
Clear tubing protects labels on the end of ropes. Slide over the label and use a safe heat source to shrink the tubing securely to the rope. Sold by the foot.
Edge Guards
Protect your rope with tough #4 duck canvas and a layer of vinyl coated polyester. Our Edge Guards close with a two-inch strip of hook-and-loop. A strong web loop lets you anchor the Edge Guard to keep it in place. (We do not use grommets as a moving rope can abrade a grommet enough to create a sharp edge.) Use an Edge Guard to protect anchor ropes and webbing as well as your rescue ropes.
Working-At-Height / Industrial Rope Access / Technical Rope Rescue
Working at height requires reliable, quality equipment. Edge Guards can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards under which they fall. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.
Edge Pad
Our heavy-duty edge pad, made from rugged 24-oz #4 canvas protects ropes from abrasion and helps keep them clean, increasing their life. It also reduces the amount a rope digs into a soft edge, such as the berm of a road. Our improved design replaces metal grommets and uses strong integrated corner web loops that allow for anchoring in place when needed. The pads also feature a set of additional offset web loops, allowing overlap when joining two or more pads to extend coverage. Pads work well over most edges and also protects when wrapped around trees, rails and beams.
Working-At-Height / Industrial Rope Access / Technical Rope Rescue
Working at height requires reliable, quality equipment. Edge Pads can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards under which they fall. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.
Ultra-Pro Edge Protectors
A CMC Rescue Exclusive
The most sought-after edge protection available features super slick, high-performance material that not only protects your rope from sharp or rough edges, but also greatly reduces friction. The Ultra-Pro is lighter and easier to transport than edge rollers or similar devices and its lower profile avoids tipping often encountered with taller devices. It conforms to the edge, and prevents sharp bends in the rope. Protectors are available in two sizes: the Ultra-Pro 2 is for two ropes, and the Ultra-Pro 4 accepts four ropes. Carabiner holes in all four corners allow the Ultra-Pro to be tied off for safety or linked together for extended protection.
Working-At-Height / Industrial Rope Access / Technical Rope Rescue
Working at height requires reliable, quality equipment. The Ultra-Pro Edge Protectors can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards under which they fall. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.