SRT Throwline Bag Set
This set features our SRT Throwline, a multi-use water rescue line, in several lengths and types of bags. The handle makes for easy and accurate throwing and has a quick-release buckle to attach the bag to a boat or PFD. The pack cloth and mesh bags both have an Ethafoam disk for added flotation. The unique EZ-Stuff bag has integral flotation, a side grommet, and a reflective stripe.
NFPA Throwline
Designed to meet the NFPA 1983 specification for a floating water rescue throwline, our NFPA Throwline, made with a Dyneema core and polypropylene sheath, handles extremely well. The bright yellow color is highly visible.
Traverse Flotation Collar
The flotation collar that folds around the outer head end perimeter of basket stretchers to assist rescuers in keeping the patients head above water line.
Patient and Cot Cover
The Ferno Patient/Stretcher Cover protects bedding, equipment and will keep patients dry in inclement weather.
It is made from lightweight, coated nylon the cover contains a dual zip that opens from both ends to access patient or equipment. The cover can be rolled or folded and stuffed into its self-contained storage pouch which can be attached to the stretcher with the integral Velcro attachment straps.
The Ferno Patient/Stretcher Cover has a full length, elasticized rim and outer Velcro straps that allows it to be fitted to any cot or basket stretcher or patient.
Model 175 Standard Floor Mount
The Model 175 Antler and Rail Fastening System is designed to limit the movement of a FERNO ambulance cot inside the compartment of a ground-based ambulance.
COMPATIBLE COTS
- POWER X1
- 35X
COMPLIANCE
- Ambulance Manufacturer’s Division (AMD) of the National Truck Equipment Association Standard 004 (August 2007 edition), Litter Retention System Static Test
- Federal Ambulance Specification KKK-A-1822 revision F (2007), through Change Notice 7 as applicable
- Ontario Provisional Land Ambulance & Emergency Response Vehicle Standard 5.0, Section 20.1 Pull Test
Model 175 Standard Wall Mount
The Model 175 Antler and Rail Fastening System is designed to limit the movement of a FERNO ambulance cot inside the compartment of a ground-based ambulance.
COMPATIBLE COTS
- POWER X1
- 35X
COMPLIANCE
- Ambulance Manufacturer’s Division (AMD) of the National Truck Equipment Association Standard 004 (August 2007 edition), Litter Retention System Static Test
- Federal Ambulance Specification KKK-A-1822 revision F (2007) through Change Notice 7 as applicable
- Ontario Provisional Land Ambulance & Emergency Response Vehicle Standard 5.0, Section 20.1 Pull Test
Rescuer Pocket Resuscitator
Clear plastic, with soft inflated cuff and fold down top, designed to fit adult or child No assembly required Patented
Model 514 Oxy-Clip
Designed to place the oxygen cylinder on the cot sidearm rather than underneath the cot or between the patient's legs. Securely holds either steel or aluminum D size cylinders. Spring-loaded latch enables the Oxy-Clip™ to instantly attach to the cot sidearm (19 mm/0.75 in diameter)
Model 521 Oxygen Cylinder Holder (Universal Bracket Base)
Designed to change with your needs, Ferno’s universal oxygen cylinder bracket accommodates steel and aluminum cylinders including “D”, “E” and Jumbo “D” sizes. Meets KKK-1822-C specifications. Constructed of stainless steel and aluminum alloy, will not rust or corrode. Universal bracket base adapts to cylinder size. Neck support bracket is changed with common tools to fit either “D” or “E” size cylinders. Universal oxygen cylinder bracket does not interfere with most oxygen regulator controls. Heavy-duty nylon strap and metal buckle keep cylinder in place. Bracket can be mounted vertically or horizontally.
O-Two Pulse Oximeter
Designed for use in a wide range of environments – from pre-hospital emergency to hospitals and home health care. Designed to fit a wide range of patient sizes from pediatric to adult with minimal clamping pressure to maintain skin integrity and circulation.
Includes Belt Case, 2 Landyards, and 2 Batteries.
Oxygen Cylinder Brackets
Wall-mounted cylinder holders securely hold either “D” or “E” size oxygen cylinders in place. Choose from the single or dual holder. Wall mounted base provides secure retention system and eliminates swaying, tipping, and rattling oxygen cylinders.
Oxygen Cylinder Restraint, Foot-end
The oxygen cylinder mount can carry a D or Jumbo D-sized portable oxygen cylinder, up to a maximum 5.3 inches in diameter by 18.75 inches in length (135 mm diameter x 476 mm length). Spiracle Technology’s “DD-Lite” oxygen cylinder is also compatible with this oxygen cylinder mount.